=V E R S I O N 7.3=
=BLOCK=
BLK – create block
BLKLAY – create a block of all objects on a layer
CH_BLK – create a selection set of all instances of a block and then modified their properties
INS – insert block at command line
WBLK – write block to a file
=COLOR=
BLU – change object to blue color
BYLAY – select objects to set to default color and line type
COL – select color with puck/mouse
CYN – change object to cyan color
DEFAULT – change object to original properties
GRN – change object to green color
MAG – change object to magenta color
MATCH – select an object and change a second selected objects’ color
RED – change object to red color
WHI – change object to white color
YEL – change object to yellow color
=COPY=
CC – copy crossing
CM – copy multiple
CO – copy
COP – copy
CP – copy previous
CW – copy window
=DIMENSION=
UNIT – select unit measurement systems: technical, architectural, surveying,
TECHDIM – technical dimensioning style
ARCHDIM – architectural dimensioning style
CIVDIM – civil dimension style
STANDIM – standard default dimensioning
1ST – no 1ST extension dimension line
2ND – no 2ND extension dimension line
BOTH – no 1ST and 2ND extension dimension line
DIMAL – align dimensioning arrow, line and text
DIMTX – set dimension text defaults
H – horizontal dimensioning
LED – pick dimension leader
MID – offset to mid point between 2 lines
TED – edit dimension text
UP – update changes to dimensioning style
V – vertical dimensioning
=DISPLAY=
25 – 25% reduction of the size of the display
50 – 50% reduction of the size of the display
75 – 75% reduction of the size of the display
95 – 95% reduction of the size of the display
ALL – display/restore the all view
ALLVIEW – save the all view
BLIPS – turn off blips on screen from previous selection points
DV – dview command
ICONOFF – turn off the xyz icon on the bottom left
ISEE – see all objects on screen
MS – sift to Model Space
NO – Stock Regen Warnings Issued [Expert Syswar = 0]
P – Pan
PS – shift to paper space
R – redraw display
REG – regenerate
RESTORE – command line prompt of which view to display/restore
YES – Regen Warning and Current Layer Warning is suppressed [Expert Syswar = 1]”)
=ZOOM=
ZA – zoom all
ZD – zoom dynamic within a frame
ZE – zoom extents
ZP – zoom previous
ZR – continuous zoom
ZW – zoom within a window
=DRAW=
A – arc
C – circle
L – Line
PO – point
BRK – Break a line a one point
CHAN – change properties at command line
CHM – chamfer
CUT – Erase a line segment between two points
EL – create an ellipse
EX – extend
EXP – explode block, pline or object
FIL – fillet lines
MIR – mirror all objects except text
OFF – offset
PART – partition a line into equal intervals
RAD – input radius and fillet lines
RULE – insert a block along a line at specified intervals
SPL – spline pline
=ERASE=
E – erase
EC – erase crossing
EE – instant erase
EP – erase previous
EW – erase window
=FIX Z COORD=
ZALL – Reset Z/Elevation coordinate of all objects
ZARC – Reset Z/Elevation coordinate of all arcs
ZBLK – Reset Z/Elevation coordinate of all blocks
ZCIRC – Reset Z/Elevation coordinate of all circles
ZPOINT – Reset Z/Elevation coordinate of all nodes/points
ZSET – Reset Z/Elevation coordinate of all lines
ZSOLID – Reset Z/Elevation coordinate of all solids
ZTX – Reset Z/Elevation coordinate of all text
=HATCH=
BR1 – architectural brick bond pattern #1 AR BRSTD hatch pattern
BR2 – architectural brick bond pattern #2 AR BRELM hatch pattern
BR3 – architectural brick bond pattern #1 AR B816C hatch pattern
CONC – architectural concrete ar conc hatch pattern
DIRT – earth hatch pattern
DOTS – dots hatch pattern
FLEX – flex hatch pattern
HAT – hatch command prompt
HEX – hex hatch pattern
INSUL – insulation hatch pattern
MUDST – mudstone hatch pattern
NET – net hatch pattern
SD – architectural sand ar sand hatch pattern
STEEL – steel Ansi31 hatch pattern
TRIANG – triangle hatch pattern
=IMAGES=
BACK – change object to: layer 0 and default line type and object color
BORDEROFF – border image is on
BORDERON – border of image is off
FRONT – place an entity above others
=INQUIRY=
AR – area and perimeter length of closed polylines and circles
DS – distance between two points
ENT – raw list of object attributes
LAYLIST – list of layers, on/off status, and their colors at command line
LI – list all attributes of a single entity in dialog box
LIW – list all attributes of a windowed selection set in dialog box
MEA – standard measure command
DWG_DATA – collect drawing data and write to a file
MAKE_LOG – begin logging command window and write to a file
=LAYER=
CLAY – command line prompt to copy an entire layer
COPLAY – graphically select an object and copy all other objects on the selected layer
DIMM – change an object to dim layer
DIMOFF – turn dim layer off
DIMON – turn dim layer on
GET_LAY – list layers and activate command line prompt
GETLAY – select blocks by specifying an attribute definition
GO – select an object and make the selected object’s layer the active layer
HCH – change an object to hatch layer
ISOLATE – select an object and turn off all other layers
JUST1 – turn off all layers except one as selected by an entity
LAY – command line prompt to layer properties
LAYALL – turn on all layers
MASK – change an object to mask layer
MASKOFF – turn mask layer off
MASKON – turn mask layer on
MLAY – command line prompt to move an entire layer
MOVLAY – graphically select an object and move all other objects on the selected layer
OLAY – change the layer of an object by selecting an object on a target layer
RELAY – graphically select object to change the layer all other objects on the selected layer
RLAY – command line prompt to change the layer of all objects on a layer
SET_LAY – return to layer settings prior to the isolate command
TURNOFF – turn off a layer by selecting an object on that layer
ZAPLAY – graphically select an object and erase all other objects on the selected layer
ZLAY – command line prompt to erase an entire layer
=LINETYPES=
CENT1 – change to center line, small scale (long dash, short dash, long dash)
CENT2 – change to center line, medium scale (long dash, short dash, long dash)
CENT3 – change to center line, large scale (long dash, short dash, long dash)
CONT – convert to continuous line
DASH1 – change to dash line, small scale (hidden line, dash, dash)
DASH2 – change to dash line, medium scale (hidden line, dash, dash)
DASH3 – change to dash line, large scale (hidden line, dash, dash)
DDOT1 – change to dash dot line, small scale
DDOT2 – change to dash dot line, medium scale
DDOT3 – change to dash dot line, large scale
LNTYPE – change line type properties by graphical selection
PHAN1 – change to phantom line, small scale (long dash, short dash, short dash)
PHAN2 – change to phantom line, medium scale (long dash, short dash, short dash)
PHAN3 – change to phantom line, large scale (long dash, short dash, short dash)
RW1 – change to divide line, small scale (right of way line – dash, dot, dot)
RW2 – change to divide line, medium scale (right of way line – dash, dot, dot)
RW3 – change to divide line, large scale (right of way line – dash, dot, dot)
=MOVE=
M – move
MC – move crossing
MP – move previous
MW – move window
BYE – save current drawing and quit
KEEP – save drawing and current view
QQQ – do not close file and quit
R12 – save drawing R12 format
=PICKBOX=
1 – pickbox 1 pixel
2 – pickbox 2 pixels
4 – pickbox 4 pixels
8 – pickbox 8 pixels
=POLYLINES=
J – join polylines
PED – edit polyline attributes
PL – draw polyline
WID – specify width of a polyline
IBOX – draw rectangular box
OCT – draw octagon
PLOTBOX – draw scaled plotting box
POLY – polygon
SQ – draw square
TRI – draw triangle
=ROTATE=
180 – Rotate 180 degrees
CCW45 – rotate 45 degrees counter clockwise
CCW90 – rotate 90 degrees counter clockwise
CW45 – rotate 45 degrees clockwise
CW90 – rotate 90 degrees clockwise
RO – rotate
ROC – rotate crossing
ROP – rotate previous
ROW – rotate window
=SCALE=
25X – scale by factor of 25 percent
2X – scale by factor of 2 times
33X – scale by factor of 33 percent
3X – scale by factor of 3 times
4X – scale by factor of 4 times
50X – scale by factor of 50 percent
5X – scale by factor of 5 times
75X – scale by factor of 75 percent
=SNAP=
SC – scale
SCP – scale previous
SCW – scale window
S=CE – snap to center
S=EN – snap to end
S=IN – snap to intersection
S=MI – snap to mid point
S=NO – snap to none
S=NOD – snap to nodes
S=TA – sanp to tangent
ISO – turns the snap off with snapmode and goes to isometric cursor
ISOFF – turns the snap off with snap mode and goes to standard cursor
=SURVEY=
AC – calculates and write area in acres
ACRE – calculates and write area in acres
ANG – calculate angle between intersection lines
BD – write bearing and distance of a line
BEAR_DIST – label bearing and distance of a line
DEC – converts decimal degrees to hours, minutes, seconds
DO_LOT – write lot numbers by imputing beginning, ending and increment number
ELV – select a point and print its Z/elevation coordinate
HMS – converts hours, minutes, seconds to decimal degrees
LOT – write lot numbers by imputing beginning, ending and increment number
POINTSIN – import points with X/Easting and Y/Northing from a text file.
PT= – checks if end points of two lines have the same X/Easting and Y/Northing coordinates
TRAV – traverse by specifyng bearing and distance by quadrant
WRITE_ACRE – select and insert a drawing tool
XY – distance calculated assuming zero elevation
XYZ – select a point and write its X/Easting, Y/Northing, and Z/Elevation
=TEXT=
CH_TX – change text creating selection sets of text strings
ED – edit text characters
EDDI – edit text by rotation, location
FIT – stretch text in a measured distance
IED – edit text in strings, attributes, and attribute blocks
IFIND – zoom and find text strings
ILIN – set linetype scale based on size of sheet and plot scale
MTX – write multi line text
PR – print text strings and their XYZ coords
REPLACE – find, and replace text strings
STY – change text style of a selection set by selecting a text string
TAG – set text defaults by selecting a text string
TX – write single line text
TXSZ – change text size of a selection set by selecting a text string
TR – trim
TRC – trim crossing
TRW – trim window